Signup Sample Report


Signup for a free 7 Day account and view Marcellus, Utica, Eagle Ford, and Antrim shale map layers in Pennsylvania, Ohio, West Virginia, Texas, and Michigan. Subscribe to view recent Lease Offers and Available Property, and additional pipeline layers. Click the Free Signup to get started, no software downloads required! (Firefox is recommended Browser)

Recent Maps


EQT Wetzel Co WV Permit Location 02-2016


Chesapeake Jefferson Co OH 12 2015 Permit.Pipeline


Gulfport Belmont Permit Location 11-24-2015


11-2015 Gulfport Belmont Co Permit


XTO Belmont Co Permit Loc w/Pipelines

Why Haynesville well density differs from Bossier measured depths

A map of the Haynesville can show dense clusters of historical wells, while a Bossier depth layer shades the basin from shallower to deeper. Viewed together, the layers can look inconsistent. They usually are not. The contrast combines horizontal development intensity with a vertical geological coordinate, so the difference becomes meaningful only after units, reference datums and map definitions are checked.

Historical Haynesville well density records where wells were drilled and attributed to the shale. Bossier measured depth describes how far below a reference surface a formation top, base or selected interval lies. One is a spatial proxy for past activity; the other is a subsurface position. Neither alone establishes gas-in-place, recoverable resource or the quality of a future well.

Australian energy teams will recognise the workflow even though geology and land systems differ. They compare prospects in the Cooper Basin around Moomba in South Australia and gas fields on the Darling Downs in Queensland, using terms such as sweet spot, seismic, joint venture and pipeline tie-in. They also distinguish petroleum exploration licences from freehold, leasehold, Crown land and native-title arrangements. The Haynesville is therefore a useful comparison, not a template that can be copied without local checks.

What historical well density measures

Historical well density is calculated by counting or normalising Haynesville wells within a defined area, often a section, township, grid cell or lease boundary. A high value indicates repeated drilling activity; it does not directly show shale thickness, hydrocarbon pore volume, net pay, well productivity or remaining recoverable resource. A busy area may simply have had accessible leases, attractive rock or infrastructure that shortened the route to sales.

The pattern also reflects history. Early vertical wells, later horizontal wells, appraisal bores, dry holes and multiple completions may be included differently, while operator records and formation assignments can change over time. A cell with many historical wells proves development occurred there, but it does not prove every well was an economic Haynesville completion. Density is evidence of past choices and data coverage as well as geology.

Layer documentation should be read before comparing colours. The data catalogue provides a sensible place to check the underlying dataset, geographic coverage and available map layers, after which the well-density legend can be matched to the actual records used.

How Bossier measured depth describes the subsurface

A measured-depth value can be true vertical depth, true vertical depth subsea, or measured depth along the borehole. These are not interchangeable. A deviated or horizontal well can have a much larger measured depth than vertical depth, and a formation value may identify its top, base, midpoint or a picked log marker. The Bossier has no single depth across the basin.

The Bossier lies below the Haynesville in much of the area, but both intervals vary in thickness and structure. Regional dip, faulting, facies changes and depth-conversion choices shift the mapped surface. A thicker stratigraphic section can place the Bossier deeper even where the Haynesville drilling pattern remains unchanged. Depth contours are therefore models tied to control wells, not direct measurements everywhere on the map.

US data commonly arrive in feet, while Australian teams normally work in metres and use a consistent subsea datum. Converting the number alone is insufficient: the original vertical reference and the type of depth must also be retained. Otherwise a valid Bossier surface can appear contradictory simply because one layer uses TVDSS and another uses borehole MD.

Why the Haynesville and Bossier signals diverge

The first reason is scale. Haynesville well density is aggregated across a horizontal area and across a selected historical period. Bossier depth is a point or surface measurement in three dimensions. There is no rule requiring a densely drilled part of the Haynesville to contain a uniformly shallow or deep Bossier, particularly where operators followed leasing, gathering lines and previously proven infrastructure rather than the Bossier structure.

The second reason is selection. The Haynesville pattern is biased toward locations that drew operators during a particular phase of drilling. The Bossier surface may rely on a different well population, including legacy wells, vertical control points or interpreted formation tops. The two layers can therefore describe the same ground without sharing the same sample, date range or level of geological confidence.

The third reason is cartographic. Well counts may be displayed as polygons, while Bossier depths may be smoothed into contours or raster cells. Grid resolution, contour interval, coordinate system, outlier treatment and the inclusion of non-producing wells all affect appearance. A mismatch can be expected even when both layers are technically correct. If metadata reveal a wrong formation assignment, unit conversion or reference datum, the mismatch becomes a data-quality problem rather than a geological signal.

A practical checklist for comparing the layers

Start with each layer’s purpose rather than its colour. The historical density layer needs an activity audit, while the Bossier depth layer needs a vertical-control audit.

Use these checks for the historical density layer:

  • Confirm the date range and whether the display shows raw counts, wells per area or a normalised score.
  • Check how Haynesville wells are attributed, including vertical, directional, horizontal and sidetracked wells.
  • Establish whether dry holes, appraisal wells and multiple completions are included.
  • Record the geographic unit and denominator, such as section, township, grid cell or square mile.
  • Treat the result as evidence of historical drilling, not as a reserve estimate or rock-quality score.

Use these checks for the Bossier depth layer:

  • Identify whether values are TVD, TVDSS or MD, and name the surface datum.
  • Establish whether each value marks a formation top, base, midpoint or log marker.
  • Review control-well spacing and the interpolation or contouring method.
  • Compare nearby measured tops with regional dip, faults and stratigraphic thickness.
  • Preserve feet and metres together during conversion so the vertical reference cannot drift.

The comparison becomes useful when density locates past development and depth describes structure. Neither should substitute for net pay, reservoir pressure, deliverability, well spacing, gathering constraints or an economic study.

Lessons for Australian gas projects

The Haynesville can inform Australian screening without being imported wholesale. Operators working around the Cooper Basin, the Darling Downs and the Eastern Gasfields use seismic interpretation, farm-ins and “sweet spot” language in a market shaped by gas-fired generation, industrial demand and LNG contracts. A dense US drilling corridor highlights how lease availability and gathering infrastructure can steer activity, but Australian infrastructure, reservoir quality and commercial contracts still determine which prospects become wells.

Land and mineral rights also require different treatment. In many US transactions, subsurface mineral rights can be leased separately from the surface. In Australia, petroleum rights, freehold and leasehold titles, Crown approvals, pastoral access and native-title agreements form a separate local framework. A grazier’s agreement may be necessary even when a company holds a PEL. Consequently, a lease-offer count or mineral-rights layer should not be read as if it were Australian access consent.

Infrastructure can be assessed alongside geology. A pipeline permit guide illustrates how permit applications can hint at future gas-flow routes and timing, yet a permit is not a producing well or proof of reserves. For Australian projects, translate US feet to metres and acres to hectares, preserve TVDSS conventions, and compare the Haynesville’s development signals with local pipeline capacity, water access, landholder terms and offtake economics.

Turn the map into a decision

Shale Navigator provides interactive, US-focused layers for shale plays, drilling permits, lease offers, pipelines, available mineral rights and property information. The platform overview describes the service and its range of users, including oil and gas companies, mineral-rights investors, engineers, landmen, attorneys, realtors, and government or university users. Those audiences can use the same underlying records for different screening tasks, provided each layer’s definition remains attached to the observation.

Start a free seven-day account to compare Haynesville well density with Bossier depth, record the vertical reference and well-selection rules, and look for areas where historical drilling and geological structure reinforce each other. Additional subscriptions can provide more data and features when the first screen identifies questions that warrant deeper research. Use the maps to narrow attention, then move to well logs, net pay estimates, pressure tests, infrastructure plans and Australian rights checks before making an investment decision.



Welcome to ShaleNavigator
This online map application displays information specific to the leasing and development of shale plays in the United States, with particular focus on the Pennsylvania, Ohio, West Virgina, and New York's Marcellus and Utica shale leasing and drilling activity.

Data
Pipeline infrastructure, company land holdings, permit data, producing well data, and water impoundment sites provide base layers in the play, with other data layers our research team will continue to add and update regularly. Subscribers will be notified as new data are added. Our data is compiled from a variety of public and private sources for your use. We make every effort to review its quality. Contact us if you have high quality, relevant data and would like to become a data contributor.

Access ShaleNavigator
There is free registration to access ShaleNavigator's basic application and a resonably priced Subscription to access advanced data and map making, drawing, and sharing features.