Signup Sample Report


Signup for a free 7 Day account and view Marcellus, Utica, Eagle Ford, and Antrim shale map layers in Pennsylvania, Ohio, West Virginia, Texas, and Michigan. Subscribe to view recent Lease Offers and Available Property, and additional pipeline layers. Click the Free Signup to get started, no software downloads required! (Firefox is recommended Browser)

Recent Maps


EQT Wetzel Co WV Permit Location 02-2016


Chesapeake Jefferson Co OH 12 2015 Permit.Pipeline


Gulfport Belmont Permit Location 11-24-2015


11-2015 Gulfport Belmont Co Permit


XTO Belmont Co Permit Loc w/Pipelines

What Well Spacing Reveals About Water-Well Risk

A map showing a new shale gas well beside an older water well can trigger an immediate concern: how close is too close? The answer is rarely found by measuring two points and treating the result as a final risk assessment. Distance is a screening signal, useful for identifying where records, construction details, groundwater data and regulatory documents deserve closer attention.

Shale Navigator brings those signals together through map layers covering shale plays, drilling permits, property information, pipelines, lease activity and available mineral rights. For Australian users assessing United States opportunities, the platform also provides a practical way to understand how development intensity, private ownership and water-well records interact in regions such as Pennsylvania, West Virginia, Ohio and Texas.

Distance Is A Starting Point, Not A Verdict

The map reveals the horizontal separation between a proposed or completed gas well and a recorded water well. That measurement may be shown in metres or feet, but the number alone does not establish whether drilling will affect water quality or supply. A shallow domestic bore, a farm well and a deeper monitoring well can occupy almost the same surface location while drawing from different formations.

The direction of groundwater movement matters as well. A water well located downhill or along a likely groundwater flow path may warrant more attention than another well at the same distance on the opposite side of a ridge. Local geology, casing design, cement integrity, hydraulic-fracturing stages and abandoned-well pathways can all alter the significance of proximity.

A useful map review therefore separates three ideas:

  • Surface distance between the two well sites
  • Vertical distance between aquifers and target formations
  • The potential pathway connecting drilling activity with groundwater

This distinction prevents a common mistake: treating a neat-looking buffer circle as proof of safety or a close marker as proof of contamination. The map is most valuable when it helps users decide which evidence to verify next.

Layers That Put Well Spacing In Context

A water-well marker becomes more informative when it is viewed alongside permits, producing wells, lease boundaries, pipelines and geological play outlines. A cluster of new permits may indicate an active development programme, while isolated drilling may represent an early test, a replacement well or a property-specific decision. Time is important too. A well drilled years after a nearby water bore may have a different regulatory record from one proposed before the bore was registered.

Property boundaries add another layer of meaning. In the United States, surface ownership, mineral ownership and leasing arrangements can be divided among different parties. A drilling site may sit on one parcel while the relevant mineral rights belong to another owner or an existing lease. Shale Navigator users assessing ownership exposure can review this property boundaries guide before interpreting well proximity as a land-value issue.

The most useful map checks usually include:

  • The age and status of each nearby water-well record
  • Permitted, drilled, producing and plugged well classifications
  • The shale formation targeted by the new well
  • Parcel boundaries, leases and mineral-rights indicators
  • Pipelines, access roads and other development infrastructure

These layers can reveal whether a new gas well is an isolated event or part of a larger field build-out. That difference affects expectations about traffic, noise, future permits, surface access and the chance that additional wells will appear near the same water source.

Older Water Wells Carry Important Evidence

Older wells are often treated as background points, yet they can provide the baseline needed to understand later changes. A pre-drilling water test may record methane, salinity, iron, bacteria, turbidity or other characteristics that naturally occur in the local aquifer. Without that starting point, later testing may identify a difference without clearly showing when it began or what caused it.

Records can also be incomplete. A domestic well may have been drilled decades ago, altered by a later owner or recorded under an address rather than precise coordinates. Some databases distinguish between active and abandoned wells, while others may contain estimated locations. A marker that appears a few hundred metres from a gas well could therefore carry positional uncertainty.

Map users should examine the source and quality of each record, then seek supporting documents where available. Useful evidence may include drilling logs, casing depths, water chemistry, completion reports, inspection notes and complaints filed with a regulator. A close match between map locations is a reason to investigate, not a substitute for field verification.

For investors and land professionals, the age of a water well can also influence due diligence timing. An older bore with little documentation may deserve a fresh baseline sample before construction. A recently tested well with detailed records may offer a clearer benchmark, even if it is physically closer to the planned drilling site.

Reading The Map Through An Australian Lens

Australian users will recognise the practical importance of water access from conditions in the Surat Basin, Cooper Basin and parts of regional Queensland and New South Wales. A farm bore can support stock, irrigation or household use across a large property, and the local concern may be less about a suburban water network than about whether a reliable private supply remains usable through a dry season.

The comparison with the United States needs care. In Australia, states regulate much of the land, water and resource framework, and mineral rights are commonly held by the Crown rather than split in the same way as private US mineral estates. Native Title, pastoral leases, groundwater licences and state environmental approvals may all affect access and development. A US map layer can inform research, but it should not be read as a direct model of Queensland or NSW ownership law.

Local context can still improve the way Australians assess American shale opportunities. Someone familiar with Great Artesian Basin sensitivities may instinctively look beyond straight-line separation and ask about aquifer connectivity, bore construction and cumulative drawdown. Someone used to checking a cadastral boundary before a rural transaction may similarly understand why a well’s position relative to a parcel is as important as its distance from a house.

For Australian analysts, these map questions are especially useful:

  • Is the water well domestic, agricultural, municipal or monitoring infrastructure?
  • Does the surrounding basin rely heavily on private bores?
  • Are groundwater records precise enough for field investigation?
  • Could multiple wells create cumulative pressure on water access?
  • Which state or county agency holds the authoritative records?

That approach helps avoid importing assumptions from a local setting such as the Hunter Valley or Darling Downs into a US shale basin with different rules, geology and land tenure.

From Visual Clues To Practical Due Diligence

A map can quickly identify a priority area, but the next stage is disciplined verification. Compare the well’s surface coordinates with permit documents and survey information. Check whether the water well was active when drilling began, whether the gas operator completed baseline testing and whether the regulator imposed special conditions because of local groundwater concerns.

The surrounding pattern matters as much as the nearest point. Several older water wells around a development pad may indicate a densely occupied rural landscape. A line of water wells extending across the same geological structure may reveal a broader groundwater-use area. A group of future permits may also matter to a buyer considering long-term land impacts, even if the first well appears acceptably distant.

Shale Navigator’s interactive layers can make this screening faster, especially when a user needs to compare many parcels or permits. The scatter trigger tips can help users work more efficiently with map data and identify patterns that are easy to miss when reviewing records one at a time.

A sound review process should move through these stages:

  • Locate the new well, water well and relevant property boundaries
  • Confirm the well status, dates and coordinate accuracy
  • Compare permits with actual drilling and production records
  • Review geology, groundwater information and baseline testing
  • Escalate significant findings to technical and legal advisers

The result is a more balanced risk picture. A close water well may be manageable where construction, monitoring and regulatory controls are strong. A more distant well may still deserve attention if records are poor, several development sites are planned or the regional aquifer is particularly vulnerable.

Use Shale Navigator to test these relationships across actual US shale areas, starting with a free seven-day account. Review the map layers, identify water-well and drilling patterns, and turn initial distance measurements into better-informed property, mineral-rights and development decisions.



Welcome to ShaleNavigator
This online map application displays information specific to the leasing and development of shale plays in the United States, with particular focus on the Pennsylvania, Ohio, West Virgina, and New York's Marcellus and Utica shale leasing and drilling activity.

Data
Pipeline infrastructure, company land holdings, permit data, producing well data, and water impoundment sites provide base layers in the play, with other data layers our research team will continue to add and update regularly. Subscribers will be notified as new data are added. Our data is compiled from a variety of public and private sources for your use. We make every effort to review its quality. Contact us if you have high quality, relevant data and would like to become a data contributor.

Access ShaleNavigator
There is free registration to access ShaleNavigator's basic application and a resonably priced Subscription to access advanced data and map making, drawing, and sharing features.